Commercial Phoenix Restaurant Equipment Repair and Maintenance – Food Steamer

Phoenix commercial restaurant equipment repair, service and maintenance. If you need service on any of your commercial restaurant needs, Contact Us today!

Commercial Steamers are a healthy alternative to cooking as they use water instead of butters and oils to cook a variety of foods. Because many of these machines have multiple hook ups, extra care is needed to extend the life of your steamer.

  • Clean the interior of your steamer

Whether you are using a compartment steamer, combi oven or steam kettle, wash out the side each day. It is especially important to wash steam kettles because food directly touches the interior of the equipment. Wipe down compartment steamers with a moist cloth. Many combi ovens come with a spray nozzle that can be used to spray down the interior

  • Delime Regularly

Any piece of equipment that uses water requires deliming. Some steamers come with a self-deliming system that only requires the push of a button. Be sure to delime boiler bases as well as the interior of the steamer.

  • Change filters regularly

With the exception of jacketed commercial steam kettles, water that is put into a commercial compartment steamer directly touches the food inside. Unfiltered water can affect the taste of the food cooked in the steamer. Changing water filters is the best way to maintain clean, healthy water.

  • Check for leaks

Any leak in an incoming water line requires the steamer to work harder in order to get the compartment up to 212ºF. Not only can leaks adversely affect your energy bill, it can also wear down your boiler by making it work harder.

  • Check the seal of your steamers

Without a proper seal, water and steam can escape the steamer cavity, increasing your cook times. Check the seal periodically to ensure that the door is flush with the machine.

  • Check the seal of your steamers

Without a proper seal, water and steam can escape the steamer cavity, increasing your cook times. Check the seal periodically to ensure that the door is flush with the machine.

  • Drain left over water out of connectionless steamers

Connectionless steamers to not connect to water or drain line. Therefore it is important to drain the water from the compartment by using the spigot at the bottom of the compartment.

  • Ensure proper drainage of water

Water in the steam cavity is 212ºF. When it leaves the compartment it should meet local codes. Most codes require that the water be cooled to 140 ºF before being drained. Check this regularly to ensure that your cooling component is not malfunctioning.

  • Avoid harsh chemicals

Harsh chemicals should never touch the interior of your steamer. Warm soapy water is adequate for cleaning your steamer. Harsh chemicals can cause damage to the inside of your machine and taint the taste of food cooked inside.

  • Check water quality regularly

Certain minerals can leave deposits on your water and drain lines that can hurt your machine. Many manufacturers won’t cover damage to the machine if the problem is caused by water that doesn’t fit their specifications.

We recommend the following levels of solvent in water:

Total Dissolved Solids – Less than 60 PPM

Total Alkalinity – Less than 20 PPM

Silica – Less than 13 PPM

Chlorine – Less than 1.5 PPM

pH Factor – 7.0 – 8.5

About Commercial Repair Guru

TPH Mechanical has been serving the Metro Phoenix Area for the past 23 years. We are a customer service orientated business, just like yours. We are not 100% satisfied until each and every customer is 100% satisfied! We have 6 licensed and trained technicians to work on all of your Commercial HVAC and Restaurant Equipment Repair needs. Reliable, On Time Guarantee and knowledgeable technicians. For honest and reliable service our technicians are non-commissioned based. Most companies will fix either the hot side or cold side of your business……We happen to do both hot and cold equipment.
Tagged , , , , , , , , , , , . Bookmark the permalink.

Comments are closed.